Heat transfer fluids of the series TERMOLAN M is a high-temperature mineral heat transfer fluid based on highly purified mineral oils selected for their ability to provide high performance properties in indirect closed heat transfer systems. Operating temperature range from -30°C up to +340°C.
High-temperature mineral heat transfer fluids of TERMOLAN M series do not contain mechanical and chemical impurities, water, which eliminates corrosion of the system.
Technical characteristics of TERMOLAN M heat transfer fluid
|
The name of the indicator |
The value of the indicator |
||||||
|
M |
M1 | M2 | M3 | M4 |
M5 |
||
| Recommended operating temperature range, °C |
-10 … 300 |
-20 … 250 | -10 … 280 | -10 … 300 | -5 … 320 |
-5 … 340 |
|
| Density at 20 °C, g/cm3 |
0.860–0.970 |
0.860–0.870 | 0.860–0.870 | 0.860–0.870 | 0.860–0.890 |
0.860–0.890 |
|
| Freezing point, °C, no more |
-30 |
-40 | -20 | – 20 | – 15 |
– 15 |
|
| Flash point, °C, not less than |
205 |
140 | 190 | 220 | 225 |
235 |
|
| Fractional composition:
10% distilled, °C, not lower 95% distilled, °C, not higher |
360 480 |
280
400 |
340
460 |
360
480 |
380
480 |
380 500 |
|
| Kinematic viscosity at 40 °C, mm2/s, within |
30 ±3,0 |
10 ±3,0 | 20 ±3,0 | 32 ±3,0 | 44 ±3,0 |
67 ±3,0 |
|
| Kinematic viscosity at 100 °C, mm2/s, within |
5,5 ±0,5 |
6,5 ±0,5 | 5,5 ±0,5 | 6,3 ±0,5 | 6,5 ±0,5 |
6,5 ±0,5 |
|
| Mass fraction of mechanical impurities, % by weight, no more |
absence |
absence | absence | absence | absence |
absence |
|
| Mass fraction of water, % by weight, no more |
absence |
absence | absence | absence | absence |
absence |
|
TERMOLAN M heat transfer fluid is supplied in metal barrels with a capacity of 185 kg net. It is allowed to be packed in other transport containers that ensure the safety of the product.
The product packed in barrels is transported by railway and road trucks in covered vehicles in accordance with the rules of cargo transportation applicable to this type of transport. In addition, TERMOLAN M heat transfer fluid is transported in railway and automobile tanks made of stainless or carbon steel, equipped with a bottom drain.
TERMOLAN M heat transfer fluid does not belong to dangerous goods.
TERMOLAN M heat transfer fluid must be stored in hermetically sealed containers, in unheated rooms. The warranty period of storage of the TERMOLAN M heat transfer fluid is 2 years.
TERMOLAN M heat transfer fluid can be used as an alternative or to recharge systems with Mobiltherm 603, Mobiltherm 605, BP Transcal N, Castrol Perfecto HT5, Shell-Thermia (A, B, etc.), XCeltherm 445FP, XCeltherm 550, etc.
FIND OUT THE COST OF TERMOLAN M HEAT TRANSFER FLUID OR GET ADVICE ON ITS USE
Fill out and submit this application form, we will contact you and answer all your questions