High-temperature organic heat transfer fluid TERMOLAN LH2 is a highly efficient heat transfer fluid with an operating temperature range from -30°C to +360°C, well pumped at low temperatures.
Physical-chemical parameters of TERMOLAN LH2 heat transfer fluid
The name of the indicator |
Value* |
Appearance |
Homogeneous liquid from colorless to light yellow |
Density at 20 °C, g/cm3 |
0.996 |
Flash point in an open crucible, °C, not less than |
130 |
Freezing point (crystallization), °C, less than |
minus 60 |
Boiling point, °C, not less than |
280 |
* Note: The values presented were obtained in the laboratory for product samples. A slight deviation from the specified properties is acceptable, depending on the batch of manufacture. The manufacturer reserves the right to make changes to the specifications. To clarify the characteristics of the products manufactured by the Polyester company at the moment, please consult with a specialist.
TERMOLAN LH2 heat transfer fluid is supplied in metal barrels. It is allowed to be packed in other transport containers that ensure the safety of the product.
The product packed in barrels is transported by railway and road trucks in covered vehicles in accordance with the rules of cargo transportation applicable to this type of transport.
In addition, TERMOLAN LH2 heat transfer fluid is transported in railway and automobile tanks made of stainless or carbon steel, equipped with a bottom drain.
TERMOLAN LH2 heat transfer fluid does not belong to dangerous goods.
TERMOLAN LH2 heat transfer fluid should be stored in hermetically sealed containers, in unheated rooms. The warranty period of storage of the TERMOLAN LH2 heat transfer fluid is not limited.
The high-temperature heat transfer fluid TERMOLAN LH2 can be used as an analog to the heat transfer fluids Xceltherm XТ, Marlotherm LH.
FIND OUT THE COST OF TERMOLAN LH2 COOLANT OR GET ADVICE ON ITS USE
Fill out and submit this application form, we will contact you and answer all your questions